OK, thought I would share one of my ‘decisions on the run’ … so, here’s the situation, I have the shaping stands that I turn sideways and whack on the ‘glassing stands’ … so, then when I glass I have the ‘reverse’ tape to hold the board … but once glassed, there is usually some sanding needed, like the dags on the laps, etc … so I end up just doing it with the glassing stands in place … but, it does get a bit hard to hold the board at times, so I decided on the run to use some masking tape to hold the board down …
So, while I’m sanding say the tail, or fin boxes, etc. I whack on some tape like the pic here (click it for a larger view).
You can see my stands in this pic too … and the ‘glassing stands’ I attach to the top.
Feel free to use any of my idea’s in your own R&D … after all that’s what Rip Off and Duplicate is all about !!!